Install Instructions

Vinyl Wallcoverings

Wall Preparation

Prior to hanging, kindly ensure that you have examined for the following:

  • The correct pattern number along with the correct quantity ordered for your project
  • Thorough inspection of your order to make certain that it’s free of defects.

Installation

Once you’ve inspected your order and verified that it’s free of defects, please proceed with the second phase of inspection and install 3 strips. If there happen to be any defects upon installation of the first 3 strips, please refrain from installing and contact Bijou Coverings. All claims must be made within 30 days of the invoice date.

Prior to hanging, please prime the entire wall surface with a wallpaper primer (Shieldz Wallpaper Primer), as this will ensure proper adhesion. Please allow 24 hours for the primer to settle and dry.

Once the walls are properly prepared, please utilize a heavy duty vinyl adhesive upon hanging. Apply the adhesive directly on the back of the wallcovering; spread the adhesive evenly and over the edges.

These wallcoverings are untrimmed; please trim the edges with a sharp blade and be sure to change your blades when needed.

Lastly, please be sure to hang your wallcoverings according to the associated pattern match & repeat.

Textured Wallcoverings

Wall Preparation

Prior to hanging, kindly ensure that you have examined for the following:

  • The correct pattern number along with the correct quantity ordered for your project
  • Thorough inspection of your order to make certain that it’s free of defects.

Installation

Once you’ve inspected your order and verified that it’s free of defects, please proceed with the second phase of inspection and install 3 strips. If there happen to be any defects upon installation of the first 3 strips, please refrain from installing and contact Bijou Coverings. All claims must be made within 30 days of the invoice date.

Prior to hanging, please prime the entire wall surface with a wallpaper primer (Shieldz Wallpaper Primer), as this will ensure proper adhesion. Please allow 24 hours for the primer to settle and dry.

Once the walls are properly prepared, please utilize a heavy duty vinyl adhesive upon hanging. Apply the adhesive directly on the back of the wallcovering; spread the adhesive evenly and over the edges.

Lastly, please be sure to hang your wallcoverings according to the associated pattern match & repeat.

Natural Wallcoverings

All natural wallcoverings are handcrafted from natural fibers & materials. It is specially dyed and there often-slight irregularities in weave & coloration. This particular look cannot be duplicated by conventional machine made wallpaper, therefore these slight defects should not be mistaken for defects.

Prior to installation, kindly confirm that you have the correct items, and verify that all material if the same dye-lot.

Please inspect your goods carefully as no claim will be accepted beyond the installation of 3 strips, and no labor claims will be considered.

Wall Preparation

Please ensure that the surfaces are clean, smooth, dry, firm and uniformly colored. The walls should be primed with a good quality primer (Shieldz wallpaper primer).

Installation

Use a heavy duty, clear, premixed, vinyl, low water content adhesive. Apply the adhesive to the products evenly; be cautious not to spread the adhesive too liberally as you want to avoid seam tearing stains. Never allow the adhesive to get on the face and/or edges of the material. We do indeed recommend the use of good quality paper liner.

Notes

  • Do not put the goods onto soiled surfaces.
  • Do not crease the goods.
  • Do not get paste on the face of the product.
  • Use Factory Edges on butt-joints.
  • Cut with a very sharp, single edge razor blade.
  • Wipe off excess paste immediately with a soft damp cloth.

Back

Loader
close